Thermostat setting automatically changes according to the temperature to avoid unnecessary cooling and heating
The room temperature can be set to go no lower than 10°C, thus ensuring that the room does not get too cold when not occupied.
The unit automatically switches between heating and cooling modes based on your temperature setting and the room temperature.
The up/down flaps automatically swing up and down.
The micro-computer automatically adjusts the airflow effectively to follow the changes of room temperature.
In the event of a temporary power failure, the air conditioner will automatically restart in the same operating mode as before, once power supply is restored.
The micro-computer gradually changes the room temperature automatically to afford a comfortable night's sleep
This digital timer allows selection of one of four options: ON, OFF, ON » OFF or OFF « ON.
Drain pump as standard
All DC models
V-PAM inverter control reduces the effects of magnetic flux and increases the maximum speed and efficiency of the compressor by vector control technology
New eco-friendly refrigerant which has a lower global warming potential of one-third than R410A
|SEER - Energy Class - Cooling||W/W||6.10 A++|
|SCOP - Energy class - Heating||W/W||4.00 A+|
|Annual Energy Consumption||kWh/a||201||979|
|Operation Range||°C DB||-10~46||-15~24|
|Airflow Rate (High)||m?/h||600||1630|
|Net Dimension H x W x D||mm||245x570x570||541x663x290|
|Drain Pipe Diameter||mm||25/32|
|Net Dimension H x W x D / Grille||mm||49x620x620|
|Piping Connections (Small / Large)||mm||6.35||9.52|
|Max Pipe Length||m||15|
|Max Height Difference||m||15|